Colliers International - Blog | CS Cavity Sliders NZ

CAVITY SLIDERS BLOG

Colliers International

  • 10/11/2018 9:10:00 AM
  • Return

CS Cavity Sliders provided an OvertakingDoors Cavity Slider with NewYorker doors to divide a large span between meeting rooms in the Colliers International Christchurch branch. Before manufacture, a site measure was carried out by a local rep to ensure accurate sizing of the cavity unit and doors and to advise on suitable finishing details. 

CS OvertakingDoors cavity sliders have an extra-thick pocket, enabling up to five doors to stack side-by-side. The three-door unit used in this project provided a neat method of dividing the space in two and fitted within 190mm framing. The full-height doors are top-hung from a triple track that sits flush with the ceiling, requiring no floor tracks or guides through the opening. When not in use, the doors slide completely flush back into the wall and out of the way.

Clear glass was chosen for this project so that when closed, the doors provide a level of privacy and acoustic control while still enabling transfer of light from one room to the other. The frames and CL400 Magnetic passage handle were powder coated black to match the rest of the decor. 


Colliers International
Architect: Karen Doig
Contractor: Consortium Construction

Related

Share

 

Categories

 

  • Recent
  • Popular
  • Tag
  • Beachlands Showhome

    Beachlands Showhome

    Sofstop cavity slider for show home
  • Cavity Sliders - The Basics

    Cavity Sliders - The Basics

    Choosing the right cavity slider for your project may be more important than you think! Most common complaints about cavity sliders are due to inferior quality products or issues with installation.
  • Cavity Sliders in Wet Areas

    Cavity Sliders in Wet Areas

    All CS Cavity Sliders are suitable for installation into the bathroom and internal wet areas if correct installation and waterproofing procedures are followed.
  • Omaha Beach House

    Omaha Beach House

    Tough fixtures and fittings to handle the harsh salt environment.