Carriage Packs | Sliding Door Rollers | CS Cavity Sliders NZ

cs iconCS Carriage Packs

M6 Carriage (120kg per set)

M6 Carriage (120kg per set)

M8 Carriage (240kg per set)

M8 Carriage (240kg per set)

M10 carriage (500kg per set)

M10 carriage (500kg per set)

Standard M6/M8 mounting plate

Standard M6/M8 mounting plate

M6/M8 mounting plate with stop

M6/M8 mounting plate with stop

  • Description
  • Downloads

M6 CARRIAGE PACK
2-wheel M6 carriages are suitable for standard doors up to 120kg. Single or Bi-Parting options are available.

M8 CARRIAGE PACK
For heavy doors up to 240kg, 4-wheel carriages with a cast stainless steel body are used for added strength and reliability. Single or Bi-Parting.

M10 CARRIAGE PACK
Suitable for extra heavy doors up to 500kg. Single or Bi-Parting.

SOFSTOP PACKS
Single (soft close) packs available in 20kg/50kg/100kg options. These items can be retrofitted to compatible track systems or cavity sliders.
Twin (soft open & close) suit doors up to 50kg. (not suitable for retrofit)

Mounting Plates: All CS mount plates incorporate the CarriSnap quick release system, which allows the door to be removed easily from the track without unscrewing anything and losing door height adjustment. Mounting plates for Bi-parting or track only setups include a built in stop that takes a load off the carriage system. Machined stainless steel mount plates are available on request.

Carriage packs also include screws, t-guides (if required), adjusting spanner and instructions.

 
Share:
 

Similar Products

 

Wall mounted track for surface sliding doors

 

Flush track for full height sliding doors. 1, 2, 3, 4 and 5 track options available

 

A versatile track typically used in office fit-outs. Single and double track options

 

Ultra heavy duty track for oversized or very heavy doors